Imagine Communications – Selenio 2.1 Release yayınlandı. Yeni firmware Customer Support Portal‘ dan giriş yaparak Knowledge Base’ den indirebilirsiniz.
Release notları aşağıdadır.
Release 2.1
Features
– None
Improvements
– Fixed issue 116331: System Time cannot be updated Fixed issue 119418: AES input delay for channel 3B doesn’t work Fixed issue 119646 (2nd issue only): X100 frame sync output will produce garbage after a prolonged period of operation with input video switches between 1080i59 and 720p59 occasionally. This causes the video output to freeze
Known Limitations
– Issue 115573: Intermittent video glitch occurs (no video timing errors) when switching inputs in line sync mode Issue 116469: Line sync doesn’t support dual link formats Issue 116786: For valid setup, if customers want to select audio metadata from AAP DE Decoder Outputs, make sure the associated AAP Processing Mode is set to Dolby E Decode, otherwise the audio metadata output will not be valid Issue 119646 (1st issue): On some units, scaler may lock up after prolonged period of operation. When the scaler locks up, you may see video artifacts such as rolling video, incorrect colour, garbage video output. However, sometimes you may not notice any failure at the video outputs until the scaler configuration is changed.
Release 2.0
Features
– Video thumbnails support for the input and output of the 2 processing channels – Insertion of closed captioning data from serial port – Support continuous numbering of SCTE-104 messages (remap mode) when mixing messages from GPI trigger
and embedded SCTE-104 packets – With optional memory module: o Profanity delay
o Independent program delay for the 2 processing channels o Animated logo with looping and fade in/out features – New audio codecs with optional advanced audio processing module: o Dolby Digital Plus Encoding of up to 7.1 channel o Dolby Digital Plus Decoding of up to 7.1 channel
o Dolby Digital Real Time Loudness Control – The following SFPs are supported in release 2.0:
Part Numbers Description SFP+2ERX SFP Series, Dual channel HD BNC inputs of SD/HD/3G (reclocked output) SFP+2ERX+NR SFP Series, Dual channel HD BNC inputs of SD/HD/3G (Non–reclocked output) SFP+2ETX SFP Series, Dual channel HD BNC outputs of SD/HD/3G (reclocked output) SFP+2ETX+NR SFP Series, Dual channel HD BNC outputs of SD/HD/3G (Non–reclocked output) SFP+DVI+OUT SFP Series: SD/HD to DVI Converter
SFP+HDMI+OUT SFP Series: SD/HD to HDMI Converter
Improvements
– Line sync window adjusted such that timed video input with reference will fall into line sync window
automatically – Fixed issue which processing channel 1 cannot support SD-525 format with V-bit goes low on lines before line 20 – Issue 103405: HDMI audio output channels 3-8 are muted – Issue 101449: add 4:3 cut mode in custom on loss of AFD – Issue 110609: the released X100 code 1.2 caused around 1 second delay on the output timecode as jam sync doesn’t sync up the frame number – Issue 111136: the customer from Deluxe Media Services Burbank needs a timecode “Copy” mode implemented for X100
Known Limitations
– Issue 115573: Intermittent video glitch occurs (no video timing errors) when switching inputs in line sync mode – Issue 116331: System Time cannot be updated – Issue 116469: Line sync doesn’t support dual link formats – Issue 116786: For valid setup, if customers want to select audio metadata from AAP DE Decoder Outputs, make sure the associated AAP Processing Mode is set to Dolby E Decode, otherwise the audio metadata output will not be valid
