Imagine Communications – Selenio X50 v4.1 firmware yayınlandı

Imagine Communications – Selenio 2.1 Release yayınlandı. Yeni firmware Customer Support Portal‘ dan giriş yaparak Knowledge Base’ den indirebilirsiniz.

Release notları aşağıdadır.

 

Release 4.1

Improvements

Release 4.1 is a re-build of release 4.0.0 due to a random reboot issue

  • Issue 119106: X50 Spontaneous Rebooting Issue

 

Release 4.0.0 Summary

Selenio X50TM release 4.0.0 is a major code update.

 

A note about the Rules Engine (Parameter Control Scripts and Custom GPI scripts):

There may be new parameters added in this code release. If a parameter control script or custom GPI script has been used for a workaround until new parameters are added and this code update is applied, the module should be setup using the latest code with the new parameters. The parameter control script or customer GPI scripts must be rewritten to remove the workaround, and retested.

Features & Enhancements

  • Advanced menu is always displayed
  • Rules Engine enhancement –  add Custom GPI Scripts (This feature is called Custom GPI Scripts-RGC)
  • DBN Ignore default value update
  • CWDM SFPs
  • A parameter for auto routing active video input
  • IP address configuration from GUI
  • AFD/Rules Engine enhancement

 

Improvements & Bug Fixes

  • Issue 94873: H-Phase is now consistent after reboot
  • Issue 40502: Logo is displayed upon recalling a preset
  • Issue 71362: AAP module now can recover from a mute status
  • Issue 73825: Fiber In LED no longer displays false flash with a -18dBm source
  • Issue 88365: Audio Preset is properly restored even after a power cycle
  • Issue 90648: Adjusted gain is now reflected on a WFM after a reboot
  • Issue 101368: “Fill Color” for background can be changed to other colors, not limited to black
  • Issue 101475: X/Y position for logo is correctly restored upon preset load
  • Issue 101476: Default value for logo insertion is set to Disabled” after factory recall
  • Issue 101773: Local preset load/save now works properly on the very first operation of a unit
  • Issue 101826: All presets listed load and save correctly
  • Issue 101962: GPI Out State implementation is same as X100
  • Issue 101963: GPI Out behaves correctly
  • Issue 101966: Custom Input GPI works properly
  • Issue 101998: Operating in delay mode and Proc Bypass mode does not display distorted video and audio
  • Issue 40312: Local presets are mapped as a parameter
  • Issue 40438: When switching between two 720p/50 sources in Sync mode under 89/50Hz operation, there is no longer 1 second of frozen video frames
  • Issue 56336: Logo display enable/disable works properly
  • Issue 62592: When composite analog is selected as input video source, blanking level of VBI area is at correct level
  • Issue 73609: Analog/AES audio feedback is stable
  • Issue 74490: Dynamic Control for Dolby D encoder works correctly
  • Issue 82335: Logo does not display jagged edges
  • Issue 85899: TBC mode does not have a 10 sample shift
  • Issue 88743: FTP does not allow anonymous login
  • Issue 88977: Upon power up, video does not display green output
  • Issue 90706: X50 can decode Dolby-E on upconverted Nexio clips
  • Issue 90923: When input is HD 1080i/50 and output is 625/50, burst of glitches does not happen
  • Issue 91216: Multimerge/UpMix default values are updated
  • Issue 91223: Parameter Control Script can use more than 10 parameters
  • Issue 95122: FPGA Core Overheat false alarm no longer happens
  • Issue 95567: Telnet through port 230 does not allow root access
  • Issue 96100: Audio routing is restored after reboot
  • Issue 96206: Audio setting is saved after power recycle
  • Issue 68896: LFE lowpass filter setting dependency for Dolby Digital and Dolby E encoder behaves correctly

 

Known Limitations

  • When switching SDI1 from 1080i/59 and or to SD-525, CC 608 may not be displayed

Imagine Communications – Selenio X100 2.1 firmware yayınlandı

Imagine Communications – Selenio 2.1 Release yayınlandı. Yeni firmware Customer Support Portal‘ dan giriş yaparak Knowledge Base’ den indirebilirsiniz.

Release notları aşağıdadır.

Release 2.1
Features
 None
Improvements
 Fixed issue 116331:  System Time cannot be updated  Fixed issue 119418:  AES input delay for channel 3B doesn’t work  Fixed issue 119646 (2nd issue only):  X100 frame sync output will produce garbage after a prolonged period of operation with input video switches between 1080i59 and 720p59 occasionally.  This causes the video output to freeze
Known Limitations
 Issue 115573:  Intermittent video glitch occurs (no video timing errors) when switching inputs in line sync mode  Issue 116469:  Line sync doesn’t support dual link formats  Issue 116786:  For valid setup, if customers want to select audio metadata from AAP DE Decoder Outputs, make sure the associated AAP Processing Mode is set to Dolby E Decode, otherwise the audio metadata output will not be valid  Issue 119646 (1st issue):  On some units, scaler may lock up after prolonged period of operation.  When the scaler locks up, you may see video artifacts such as rolling video, incorrect colour, garbage video output.  However, sometimes you may not notice any failure at the video outputs until the scaler configuration is changed.  
Release 2.0
Features
 Video thumbnails support for the input and output of the 2 processing channels  Insertion of closed captioning data from serial port  Support continuous numbering of SCTE-104 messages (remap mode) when mixing messages from GPI trigger
and embedded SCTE-104 packets  With optional memory module: o Profanity delay
o Independent program delay for the 2 processing channels o Animated logo with looping and fade in/out features  New audio codecs with optional advanced audio processing module: o Dolby Digital Plus Encoding of up to 7.1 channel o Dolby Digital Plus Decoding of up to 7.1 channel

o Dolby Digital Real Time Loudness Control  The following SFPs are supported in release 2.0:

Part Numbers Description SFP+2ERX SFP Series, Dual channel HD BNC inputs of SD/HD/3G (reclocked output) SFP+2ERX+NR SFP Series, Dual channel HD BNC inputs of SD/HD/3G (Nonreclocked output) SFP+2ETX SFP Series, Dual channel HD BNC outputs of SD/HD/3G (reclocked output) SFP+2ETX+NR SFP Series, Dual channel HD BNC outputs of SD/HD/3G (Nonreclocked output) SFP+DVI+OUT SFP Series: SD/HD to DVI Converter
SFP+HDMI+OUT SFP Series: SD/HD to HDMI Converter
Improvements
 Line sync window adjusted such that timed video input with reference will fall into line sync window
automatically  Fixed issue which processing channel 1 cannot support SD-525 format with V-bit goes low on lines before line 20  Issue 103405:  HDMI audio output channels 3-8 are muted  Issue 101449:  add 4:3 cut mode in custom on loss of AFD  Issue 110609:  the released X100 code 1.2 caused around 1 second delay on the output timecode as jam sync doesn’t sync up the frame number  Issue 111136:  the customer from Deluxe Media Services Burbank needs a timecode “Copy” mode implemented for X100
Known Limitations
 Issue 115573:  Intermittent video glitch occurs (no video timing errors) when switching inputs in line sync mode  Issue 116331:  System Time cannot be updated  Issue 116469:  Line sync doesn’t support dual link formats  Issue 116786:  For valid setup, if customers want to select audio metadata from AAP DE Decoder Outputs, make sure the associated AAP Processing Mode is set to Dolby E Decode, otherwise the audio metadata output will

not be valid